Single-electrode chips have very high requirements for solid crystal in the packaging industry. For example, in the LED production process, the quality of the solid crystal affects the quality of the finished LED products. There are many factors that cause LED solid crystal cracking. We only discuss the solution of LED solid crystal cracking from three factors: material, machine and man-made. First, the chip material itself is broken If the chip breakage is greater than 1/5 of the width of the single-sided chip or the break is at an oblique angle, each side is longer than 2/5 chips or damaged to the aluminum pad. Such chips are unacceptable (this is an item in the chip inspection standard) . The main causes of the bad phenomenon are: 1. The chip manufacturer is not working properly 2. Chip incoming inspection has not been sampled 3. Not picked out during online operation Solution: 1. Inform the chip manufacturer to improve 2 Strengthen the feed inspection, and reject the chip with too much damage. 3. When the Q test is performed online, the broken chip should be picked out and the good chip should be added. Second, the LED solid crystal machine is used improperly 1. Improper suction parameters of the machine The nozzle height and the solid crystal height of the machine are directly controlled by the parameters in the machine computer. The parameters are large, the suction height is small; the parameters are small, the suction height is large, and the chip is damaged or not, which is directly affected by the suction height parameter of the machine. The main reasons for the bad phenomenon are: large parameters of the machine, low hunting height, excessive force on the chip, resulting in chip damage. Solution: Adjust the parameters of the machine, and appropriately increase the height of the nozzle or the height of the solid crystal. Adjust the height of the nozzle in the first “Pick Level†in the “Bond head menu†in the “SETUP†mode of the machine, and then in the second item. Bond Level" adjusts the solid crystal height. Light reflectors in China with resonable price and good quality,We hope to establish cooperative relationship with you. Light Reflector,Aluminum Light Reflector,Street Light Reflector,Energy Save Light Reflector Yangzhou Huadong Can Illuminations Mould Manufactory Co., Ltd. , https://www.light-reflectors.com
August 30, 2020