In order to avoid the price competition, the LED factory set the vehicle products as the transformation target. Although the orders are stable and have the endurance, the certification threshold is extremely high, and it is not easy to enter the original supply chain. This year, Jingdian (2448) and Yiguang (2393) ), Ronda (3698) and other automotive products are less than 2 digits. Brokerage estimates that Yiguang's vehicle-related revenue share is expected to increase from 4% to 6% this year, and the proportion of operations has been relatively obvious. LED Taiwan ended successfully last week. Compared with previous years, this year's major manufacturers have emphasized the application of automotive and invisible products. Although the proportion is not high, it has been seen that the first-tier manufacturers hope to pull out a new front and dilute them. There is price pressure for LED backlight and LED lighting operation. Jingdian pointed out that this year's highlights are LED lighting and quaternary. LED lighting is expected to be warmed up by month until June, and the price is temporarily stabilized. In terms of quaternary products, European cars are gradually using quaternary products to build cars. The internal light environment stimulates the demand for four yuan. Last year, the crystal TV vehicle sector accounted for about 9-10% of the quaternary products, and this year it is estimated to rise to 13-15%. Based on the 5% of the revenue of the crystal power revenue calculation, the four-element LED for vehicles is estimated to account for about 3.5% of the revenue of Jingdian this year. Ronda also exhibited IR Touch and automotive LED modules this year. The automotive LED modules initially locked in the mainland high-speed rail system. At present, the test has been started. IR Touch has introduced SMD-type modular products. The goods are supplied to Jiashida (2352), which can be used in outdoor environments such as ATMs. Ronda has set up a new business unit. Automotive, invisible light, UV LED and other products are classified in this department. In 2014, the new business unit has just become a military. Last year, the proportion of revenue was below 5%. Ronda is estimated to reach 2019. A considerable proportion of operations is expected to climb to 10-20%. The proportion of Yiguang Gengsheng car products is very early. Recently, the company released the three-in-one RGB LED for the car, which can be applied to the interior situation and instrument panel. The new company of Yiguang Copper and Copper will be introduced into mass production this year. One of the main products, according to the brokerage estimate, Yiguang's revenue from automotive products this year is expected to increase from 4% last year to 6% this year, and the net profit after tax will still be stable at 4 yuan.
All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards.
LED LAMPS is popular in the electronics industry with low power consumption, small size, durability, long life, low heat, etc.
Those LED Lamps are really bright so they can be seen in daytime and from any angle.
We produce it by high qualiyt raw materials: Epistar chip, 99.99% gold wire and heat resistant raw materials. Angle like: 5 Degree, 15 Degree 20 Degree, 30 Degree, 45 Degree, 60 Degree, 90 Degree, 120 Degree and 140 Degree are avaliable.
Or angle can be customized as you need.
1, Hard shape and moisture-proof: LED lamps was packaged by epoxy, which is can ensure the good moisture-proof and the perfact shape.
2, Multiple angle selection: 5 degrees, 15 degrees 20 degrees, 30 degrees, 45 degrees, 60 degrees, 90 degrees, 120 degrees and 140 degrees and so on. Or you can also customize the angle.
3, Colorful epoxy: Normally, the epoxy can be water clear, red diffused, blue diffused, yellow diffused, green diffused, orange diffused. customized are also available.
5, The length of pin: LED Lamp's pin can be 17mm, 29mm,
90 degrees bent feet, braided pin and so on. Tips: taping pins can
operate on a robot, greatly improving the efficiency of manual plug-ins.
LED Lamps LED Lamps, LED Lights, LED Bulb Lamp, 4W LED Lamps Shenzhen Best LED Opto-electronic Co.,Ltd , https://www.bestsmd.com
Catalog of LED Lamps.
We are LED Lamps manufacturer from China.
LED LAMPS advantages:
4, Multiple Shape/Size selection: 2mm pacifier led, 3mm round led, 4mm round led, 5mm round led, 6mm round led, 8mm round led, 10mm round led, 3mm flat led, 5mm flat led, 346 Ellipse LED, 546 Ellipse LED, 5mm Straw Hat LED, 8mm Straw Hat LED, 5mm Tip LED, 3mm Short Head LED, 234mm Square LED, 255mm Square LED, 257mm Square LED etc.
We have 100% product testing system and excellent after-sales service and technical support. At the same time, We offer five years of warranty for you. Looking forward to cooperate with you. The highest quality won't let you disappointment.
March 25, 2021