Smd Mic,Smd Microphone,Smd Condenser Microphone,Smd Dynamic Microphone NINGBO SANCO ELECTRONICS CO., LTD. , https://www.sancobuzzer.com
Skyworth cool open LCD TVs all use LED display, it does not exist in the lamp, but not the bad lamp, LCD TV screen and light source (display internal backlight and backlight) has nothing to do.
The appearance of Huaping is caused by the failure of the TV motherboard, power supply board, display driver board (screen control board), and the display screen. The most common is the display driver board and the motherboard's LVDS display connector cable, the two ends of the socket contact Bad, then the motherboard or display is damaged.
First, check whether the resolution or refresh rate of the LCD splicing screen is set too high. LCD splicing screen resolution is generally lower than the crt display, if more than the manufacturer's recommended optimal resolution, there may be Huaping phenomenon. 
Skyworth cool open LCD TV Huaping
Secondly, we can check whether the video card is overclocked, and "regulate the remedy." If the video card is overclocked, the screen will often appear. In this case, the frequency of overclocking should be properly reduced, but it should be noted that the frequency of video memory must be reduced first.
Again, check if an incompatible graphics card driver is installed. This situation is generally easy to ignore, because the graphics card driver update faster and faster (especially nvidia video card), some users can not wait to install the latest version of the driver.
In fact, some of the latest drivers are either test versions or versions that are optimized for a particular graphics card or game. Using such drivers can sometimes lead to the appearance of flower screens. Therefore, it is recommended that you use Microsoft-certified drivers as much as possible. It is best to use the drivers provided by the graphics card manufacturers. 
Skyworth cool open LCD TV Huaping
Finally, check the quality of your graphics card. If the video card appears after the replacement of the video card, and after the first and second strokes fail to work, check whether the anti-electromagnetic interference (EMI) and the electromagnetic shielding quality of the video card are over.
The specific method is: Place some components that may produce electromagnetic interference away from the video card installation (such as hard disk) as far as possible, and then see if the flower screen disappears. If it is determined that the electromagnetic shielding function of the graphics card is off, the graphics card should be replaced, or the shielding mask should be made.
Skyworth cool open LCD TV Huaping
1, computer board and chip failure
The user menu is normal, but the picture appears to be in a flowering phenomenon. The problem is generally on the computer board and the scaler processing chip circuit. In this case, the repair worker can be asked to perform repair welding. By pressing the chip, it can be observed whether there is a significant change in the screen blossoming phenomenon. If there is a noticeable change, it is due to the welding of the chip. Use a special tool such as a hot air gun to heat the IC. , re-welding the poor contact foot can be. 
Skyworth cool open LCD TV Huaping
2, screen failure
If the flower screen is repeatedly powered on, the stripes and colors of the flower will not change, then the screen itself will be broken. At this time, the driver board must be replaced.
3, LVDS wire bad contact
If the screen shows a faulty screen or an irregular screen, it is common for the LVDS to be in poor contact. Then clean up the connection line.
4, the driver board failure
If the user finds that the fringe and color of the flower after the TV screen is repeatedly powered on are changed, the driver board is generally faulty and the driver board can be replaced.
Computer connection Skyworth cool open LCD TV led to Huaping 
Skyworth cool open LCD TV Huaping
After the computer is connected to the LCD, there are two reasons for displaying the screen: 1. The problem of video lines. 2, the resolution problem. First change the video cable. If it doesn't work, then change the computer resolution. In general, LCD TVs have their nominal resolution, say 1366x768.
Sofa butler technology believes everyone is not strange to Skyworth CoolTV LCD TV, but when we use it, we will find that it has Huaping phenomenon. What is going on here? Today, Xiao Bian will talk with everyone about its solution.
March 25, 2021