From a management perspective, the first priority is to ensure strict control over personnel. All electricians must be certified and authorized to perform their tasks; unqualified individuals are strictly prohibited from handling electrical lines or equipment. Second, it's essential to follow all electrical safety regulations and procedures. Work must be carried out in accordance with the work permit system, work supervision system, and the rules for work interruption, transfer, and completion. Third, regular safety inspections should be conducted, including daily checks and more thorough evaluations, especially during rainy seasons when risks are higher. Fourth, continuous education on safe electricity usage is necessary. Employees should understand basic electrical knowledge and safety protocols. Those who use electrical devices should also be familiar with specific safety measures.
From a technical standpoint, advanced protective measures must be implemented to prevent direct or indirect contact with live parts, which can lead to electric shocks. Insulation, barriers, clearance distances, and leakage protection are all effective methods to prevent direct contact. Protective grounding and protective earthing are fundamental measures in electrical safety systems.
Based on the basic requirements for safe electricity use—such as proper installation, timely removal, correct usage, and prompt repairs—the following operational guidelines are crucial for preventing electric shocks:
1. Non-electricians are strictly forbidden to dismantle or tamper with electrical lines, plugs, sockets, or any electrical equipment.
2. Before using any electrical device, always check that the wiring, plug, socket, and residual current device (RCD) are in good working condition.
3. If an electrical fault occurs, only a qualified electrician should handle it. Non-professionals must not attempt to repair or fix the issue themselves. When inspecting or repairing distribution boxes or switchgear, make sure to turn off the power at the main switch and hang a "Power Off" sign.
4. When using handheld electric tools like vibrators in wet conditions, an electrician should connect the power supply and install a leakage protector. Operators must wear insulated shoes and gloves before starting work.
5. Always disconnect the power before moving or relocating any electrical equipment.
6. When handling metal objects such as steel bars or pipes, never touch the wires.
7. Do not hang materials on electrical wires.
8. It is strictly prohibited to use lighting fixtures for heating or to use high-power electrical appliances like electric heaters without permission.
9. When working near overhead power lines, power should be turned off if possible. If not, isolation measures must be taken to maintain a safe distance and avoid contact.
10. Electrical wires must be kept overhead and not dragged along the ground or construction floors. If they need to cross over these areas, proper protection should be in place to prevent damage from vehicles, materials, or people stepping on them. FRP GRP Roofing Sheet,FRP Fireproof Roof Sheet,FRP Flat Sheet,frp roofing sheet Hebei Dingshengda Composite Material Co., Ltd. , https://www.frpdsd.com
July 17, 2025