Contact: Zhang Jie Mobile: phone fax E-mail: In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Withstand high voltage up to 750V (IEC/EN standard)
UL 94V-2 or UL 94V-0 flame retardant housing
Anti-falling screws
Optional wire protection
1~12 poles, dividable as requested
Maximum wiring capacity of 10 mm2
T10 Series Terminal Blocks,Electrical Terminal Blocks,Power Terminal Block,Terminal Block Electrical Jiangmen Krealux Electrical Appliances Co.,Ltd. , https://www.krealux-online.com
Tender code: CBL_20161116_29440395
Bulletin category: Domestic tender
Tenderer: Yangmei Group Taiyuan Chemical New Material Co., Ltd. Source of funds: Others
1. The tendering conditions were entrusted by Yangyuan Coal Group Taiyuan Chemical New Material Co., Ltd. (Tenderee), and the Yangguang Coal Group Taiyuan Chemical New Material Co., Ltd. caprolactam project polyamide 6 conventional spinning modifier configuration system and liquid modifier configuration system Design and equipment procurement, organize domestic open bidding. (The funds are self-raised funds) The relevant matters are now announced as follows.
2. Bidding content and scope of tender content: Design of polyamide 6 conventional spinning modifier configuration system, liquid modifier configuration system and equipment procurement tender document number: JSF2016-82-43-649
The scope of the tender: 200t/d polyamide 6 production line additive system (ie: benzoate preparation system) and 100t/d polyamide 6 production line additive system (ie: liquid modifier preparation system) design and equipment procurement.
Process requirements: 1. Polyamide 6 conventional spinning modifier preparation system (benzoic acid preparation system) can meet the requirements of the amount of benzoic acid used for the production of conventional spinning chips on the 100-ton/day polymerization line of the C line, and requires the production of conventional spinning chips. The amino- and carboxyl-terminated content meets industry standards. The conventional spun slices had a relative (96% concentrated sulfuric acid) viscosity of 2.75±0.02, an amino-terminated content of M±3 mmol/L, and a carboxyl-terminated content of M±3 mmol/L (the value of M was related to caprolactam). The technical index of conventional spun chips was based on industry standards. FZ/T 51004---2011.
2. The 100t/d polyamide 6 production line additive system can meet the requirement of liquid modifier dosage for high-speed spinning chips produced on the two polymerization lines A line 200 tons/day and C line 100 tons/day, and requires the production of high-speed spinning chips The content of terminal amino groups and carboxyl groups in the industry meets industry standards. High-speed spinning slice relative (96% concentrated sulfuric acid) viscosity 2.45 ± 0.02 (adjustable), amino-terminated content M ± 3 mmol/L (adjustable), carboxyl-terminated content M ± 3 mmol/L (adjustable), high-speed spinning chip specifications Refer to the industry standard FZ/T 51004---2011 (the value of M is related to caprolactam). See the tender documents for the remaining parameters.
3, bidder qualification requirements
3.1 Those who have registered in the territory of the People's Republic of China, have independent legal personality, have the ability to independently bear civil liabilities, and have the ability to independently conclude contracts.
3.2 The corresponding qualifications and capabilities in design, manufacturing, quality control, and operation and management of professional technology, equipment and facilities, personnel organization, and performance experience. It has national or industry-specific licenses, mandatory certifications, logo certificates, and other related certificates.
3.3 passed the ISO9001 quality management system certification and has a valid certification.
3.4 In the past three years (2013 to 2015), there were the same or similar results in the territory of the People's Republic of China.
3.5 With good bank credit and business reputation, not being ordered to suspend business, property being taken over, frozen, bankruptcy.
3.6 Tender companies must have Class A and above qualifications in the chemical, petrochemical and pharmaceutical industries (Chemical Engineering).
3.7 Accept Consortium.
3.8 Relevant documents to be carried on registration (1) Power of attorney (original) for corporate legal person; identity card of legal person; identity card of authorized person (copy), and agreement of commonwealth (original);
(2) copy of business license; organization code; tax registration certificate (copy);
(3) Enterprise Account Opening License (copy);
(4) 2013-2015 similar performance with the same or above scale, the performance list is not valid, a copy of the contract;
(5) Notification letter issued by the procuratorial agency inquiring about bribery criminal archives results after the issuance of the announcement (Original) (Commonwealth must notify the procuratorate of the consortium to inquire about the results of bribery crime files).
Note: The above information is required to provide electronic version of the scan (required in JPG format). Legal person and authorized person's identity card, copy of business license and enterprise account opening permit need to provide a copy of the official seal of the paper. The original letter is required for the notice letter from the procuratorial agency inquiring about bribery crime files.
4. Obtaining tender documents
4.1 Any bidder who wishes to participate in the bid is requested to submit a bid between 8 pm and 17 pm daily from November 16, 2016 to November 24, 2016 (excluding legal holidays, statutory holidays).
4.2 Each set of bidding documents is priced at RMB 500 and will not be refunded after sale.
4.3 Failing to complete the above requirements, format, and registration information is not considered as an unqualified application.
5. Time and place for bidding, opening time:
5.1 Tendering time and opening time: see the bidding documents
5.2 Location: See tender documents
Bidding number: JSF2016-82-43-649
August 25, 2021