Recently, the public Ms. Xie said that she spent 4 yuan to buy an energy-saving lamp in the stall. The result was less than half a month, and the energy-saving lamp was “reimbursed”. As a result, she questioned the quality of the energy-saving lamp.

According to Ms. Xie, not long ago, the energy-saving lamps in her kitchen were broken. She went to the electrical store to buy a new one, but the same energy-saving lamps were sold at different prices, some 22 yuan, some 15 yuan, the cheapest. Also got 8 yuan. Ms. Xie, who was stupid, finally bought an energy-saving lamp for 4 yuan on the stall and went home to install it. After more than ten days, the newly-replaced energy-saving lamps were “reimbursed” with a slamming. She found the operators of the stalls. The other party said that the lamps using the 4 yuan grade had to “take a chance”, sometimes it could be used for a long time, sometimes It burned easily, and he couldn't "three packs" of the lamps sold.

Why is the same energy-saving lamp sold at a different price? According to people in the group, the energy-saving lamps market is in fact very good. At present, many "energy-saving lamps" that do not meet the requirements are not energy-saving, and the quality is not good. For example, according to the relevant national standards, the brightness of 7W energy-saving lamps should be equivalent to 35W incandescent lamps, and the brightness of unqualified products is only 25W or 30W, so the brightness of the lamps can be used at the beginning, but as the use time becomes longer, it is very It will darken or flicker. Such "energy-saving lamps" may have to be replaced in a month or two. The main reason is that some production companies cut corners in the design and production process, using inferior quality materials without quality assurance, resulting in the quality of the products. Such "energy-saving lamps" not only fail to achieve energy-saving effects, but may also consume more power. Also, some inferior lamps have a reduced service life and promise to use 8,000 hours, but it will be broken in less than two or three thousand hours.

The use of energy-saving lamps was originally intended to save money, but because of the quality problems of the energy-saving lamps themselves, the saving behavior became a wasteful act. The emergence of such an embarrassing situation should lead to people's reflection, especially the attention of production companies, and can not make energy-saving lamps become "money-sucking lights."

Relevant people remind consumers: Buying energy-saving electrical appliances should be purchased in regular shopping malls, and choose brands with better reputation and better quality. According to the national regulations, the rated voltage and voltage range must be marked on the outer packaging of the energy-saving lamp product; in the light bulb or the instruction manual, supplementary instructions regarding the safe use of the lamp must be marked. In addition, the lamp head of qualified products should not be loose, the phosphor coating should be applied evenly, and the phosphor should be crystal clear and white.

The foundation of the development of energy-saving lighting industry is safety and environmental protection
Urban lighting active and reactive energy saving technology
Chengdu uses energy-saving lamps to display “energy-saving business cards”
Yixing invested 3 million in urban energy-saving lighting
Golden Week "tested" a weak awareness of energy conservation
French research believes that energy-saving lamps cannot be used in close proximity
Indian environmentalists use water-saving lamps to promote energy-saving lamps
Wal-Mart energy-saving lamps: sales hit a new high




1

1.25mm Ribbon Connector

To use the 1.25mm Ribbon Connector, you will need to first ensure that the ribbon cable is properly aligned with the connector. The pins on the connector should be lined up with the corresponding holes on the ribbon cable. Once the cable is properly aligned, you can then insert the connector into the corresponding socket on the device.

Overall, the 1.25mm Ribbon Connector is a reliable and versatile connector that is widely used in the electronics industry. Its high-density design and compatibility with ribbon cables make it an ideal choice for many applications

1.25Mm Ribbon Connector,Pressure Terminal Connectors,Pressure Terminal Connector,Pressure Connectors

YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com

May 29, 2025