Volkswagen ID officially unveiled at the Guangzhou Auto Show, which was the first show in Asia. Positioned as a compact version, the ID model is a fully automatic electric vehicle with a range of 400 to 600 km after a single charge. The production model based on ID will be launched in 2020. The ID adopts a four-door design with length, width and height of 4100mm, 1800mm and 1530mm respectively. The length of the car is about 155mm shorter than that of golf. The wheelbase of 2750mm is 130mm more than golf, and the wheelbase of Passat is almost the same. At the same time, the ID's suspension uses a minimalist design. For the interior, the ID sublimates the traditional cockpit into an interactive center like a mobile lounge, creating a feature-rich open space (OpenSpace). The spacious space and simple and easy-to-use operating system allow the car to enjoy a new driving experience. The ID is the first compact concept car developed by Volkswagen based on the MEB platform. The MEB platform is called “Electric Vehicle Modular Platform†and is a platform specially designed for pure electric vehicles. It features a long wheelbase; a minimum turning radius of 9.9m; a flat lithium battery is placed on the chassis to reduce the center of gravity of the vehicle; the multi-link rear axle incorporates a drive unit and a decoupled subframe to optimize the vehicle. Dynamic performance and ideal quietness. In the power section, this concept car is equipped with a motor with a maximum power of 170 hp. The pure electric cruising range will reach 600km. It will be mass-produced in 2020 and will be released to the market. The price will be comparable to that of the current golf, thus completing 2025 for the public. Plan to sell 1 million electric vehicles a year. 3D Ztomization Fireplace / Water Steam Fireplace/ Water Vapor Fireplace 3D ztomization fireplace, electronic water steam fireplace, water vapor fireplace, 64 color APP Electric fireplace, 800mm~1800mm fireplace Tonya Display Limited , https://www.tydisplay.com
Why choice TONYA water vapour fireplace ?
A real alternative to conventional inserts and traditional fireplaces, 3D cold-flame steam fireplaces have unmatched advantages. In particular, they make it possible to overcome the main constraints of installation, operation and maintenance encountered in fireplaces that use wood or gas.
It is a subtle fusion of three components, namely, ultra-fine water vapor, the light emitted by the RGB LED, and the action of the fan and the heating wire, making it possible to obtain a simulated hand-touchable colored flame.
Ultrasonic waves are produced by "transducers" (or sprayers), which are mechanical waves that will vibrate (silence) water and convert it into ultra-fine water vapor. Under the action of the fan, the heating wire generates a temperature that can be touched by the hand. After heating, the water vapor is radiated into the surrounding air and illuminated by LEDs.
Ultra-fine water vapor (only a few microns) is immediately absorbed by the surrounding air. Water vapor will not condense and will not generate moisture on adjacent walls. This is commonly referred to as dry water vapor.
August 25, 2021